Stone Glacier Cirque LITE Jacket
- Low stock - 1 item left
The Cirque LITE Jacket strikes the perfect balance between warmth, breathability, and weather resistance to create a truly versatile layer that can be worn across the spectrum of mountain hunting conditions. A hybrid fabric construction places synthetic insulation and a weather-resistant face fabric across the torso for core warmth with highly breathable microgrid fleece in the side panels to purge sweat. The Cirque LITE's ability to maintain your temperature and move moisture excels in the dynamic conditions experienced on the hunt, whether it’s a stop-and-go stalk on a cool September evening or a savage morning ascent to a snow-swept ridge in late November. Worn as primary insulation in cool conditions, as outerwear when you’re on the move in variable conditions, or as a mid-layer under other insulation when the mercury plummets, the Cirque LITE is a reliable pro that will stay in the lineup all season long.
Specifications
- 15.2 oz. (Large)
- Body-mapped, hybrid fabric construction
- PrimaLoft® Gold 60g/m2 synthetic insulation
- 15 Denier weather-resistant Pertex® face fabric
- Breathable microgrid fleece side panels treated with Polygiene odor control
- Articulated adjustable hood
- Adjustable elastic waist
- Elastic stretch wrist cuff
- 2 hand pockets strategically placed for use while wearing a pack
- Internal stretch pockets for storing and drying gear
- Extended tail for wear with a pack
Size Chart
Stone Glacier products are designed with an athletic fit to provide the highest level of performance in the field. Use the sizing chart below to help guide you to the appropriately sized garment. Note, the De Havilland Pants incorporate our patented Contour™ Waist System which provides approximately 3 inches of waist adjustment to create an exact fit.
HOW TO FIND YOUR MEASUREMENTS:
Note: Calculate your body measurements, then select your product size. If your measurements are between sizes, select a larger size for a looser fit or a smaller size for a tighter fit.
- Measured Chest: With arms relaxed at your sides, measure under your arms, around the fullest part of your chest.
- Measured Sleeve: With arm relaxed at your side and slightly bent, measure from center back neck, across the shoulder to elbow and down to the wrist.
- Measured Belt Line: Measure around your waist at the point in which your pants typically ride.
- Measured Inseam: From a standing position, measure from your crotch down the inside leg to the floor.
Nearly all Stone Glacier pants feature our patented Contour Waist™ system, which allows for three inches of waist adjustment. Additionally, SG pants are sized accordingly for layering. If you wear a large in our base layers, you will also wear a large in other SG layers. If you are still unsure of what size pants to buy, measure your waist and reference the "Measured Belt Line" chart below.
PROPER FIT & USE:
Our patented Contour Waist™ System is designed to provide an exact fit around your waist. No more buying pants that are slightly too large or don’t fit quite right. As well, this system allows you to adjust the waist size of your pants to allow for a proper fit when layering base layers or insulation bottoms underneath. To adjust the Contour Waist, follow the below steps:
Note: Proper fit is best achieved by adjusting the Contour Waist while wearing the pants.
- Unfasten the top buckle attachment and unzip the zipper fly.
- While the zipper fly is unzipped, detach the left side (left as when the wearer is looking down on the zipper fly) of the zipper from the hook and loop pad by pulling it down and away, starting at the top.
- Reattach the zipper fly to the hook and loop pad by starting at the bottom and pressing it firmly and evenly up towards the top. Attaching the zipper at a steeper angle to the left, will adjust the pants smaller. Attaching the zipper further to the right will adjust the pants larger.
- Once the zipper is reattached, zip up the fly as normal and fasten the top buckle, adjusting tension as necessary. Repeat steps 3 & 4 until the proper fit is achieved.
- Once you find your proper fit the zipper fly will work as normal and adjustment does not need to be made again until required when layering or as desired.
Expert Insights
Product Videos