Outdoorsmans Binocular Adapter

Tall vs Short

Our Tall Binocular Adapter works best with 56mm objective lenses to allow a full range of adjustment. It also provides an additional inch of vertical length on the glassing setup.

The Short Binocular Adapter works nicely with 50mm and smaller objective lenses and can be left attached to the stud for storage inside a bino harness in some cases.

• Lightweight Machined Aluminum
• Securely locks binoculars in place
• Short Binocular Adapter Height - 3.5"
• Tall Binocular Adapter Height - 4.5"

Important Notes
This is a 2-part system - Studs Sold Separately

How does the Outdoorsmans Bino Adapter attach to my tripod?
The Bino adapter can be threaded directly to the tripod using a 1/4x20 stud, or can be used with any of the Outdoormans Quick Release adapters, like the Micro Pan Head and Pan Head.

Why do my binoculars tilt side to side?
When the adapter is in the fully locked position you may notice that the binoculars are still able to tilt from side to side. This is intentional and necessary for two reasons:

1. Glassing on flat ground is not a common occurrence and being able to level the binoculars is vital to staying comfortable and effective while glassing.
2. Mistakes happen and sometimes spills can happen. If something like that were to happen, having a little give in the adapter will help to reduce damage and impact.

Specifications